Technical Cleanliness of Components

CLS600P-MX technical cleanliness extraction system complied with ISO 16232 and VDA 19.1 standards is the most commonly used extraction method, which covers a large portion of the requirements for particle extraction from components which require low blank value. CLS600P-MX technical cleanliness cabinet with 600 * 600 * 800mm (L*W*H) ceramic coating operation chamber for small to midsized components, the technical cleanliness cabinet with function as below: pressure-rinsing cleaning, spray cleaning, side wall spray self-cleaning, membrane sample preparation (particle extraction), online filtration and recovery of cleaning agents, and circulating fine filtration.

Diameter: 47mm Pore size: 5μm Cat. No: PA5u m-47 Lot. No: Sin886070YGP005 Package: 100pcs (25pcs each box) Optional Diameter: 47mm, 50mm Optional Pore size: 5μm, 10μm, 15μm, 25μm, 40μm, 50μm, 75μm, 100μm, 150μm, 200μm, 500μm,600μm Excellent high-temperature resistance Supports pre-filtration in solution Resistant to curling and deformation Suitable for technical cleanliness inspection of automotive components

CLS-S double chamber cleanliness cabinet with separate rinsing conical trough chamber and ultrasonic conical trough chamber, integrates pressure-rinsing cleaning, spray cleaning, side wall spray self-cleaning, ultrasonic cleaning, membrane sample preparation (particle extraction), online filtration and recovery of cleaning agents, and circulating fine filtration into one. The separate extraction chamber system is the optimal solution that divide the different products into two independent cabins for cleanliness testing; So as to avoid the mutual pollution caused by different extraction methods of different products in a cabin, in this way to make sure all test following up the ISO 16232 and VDA19.1 analysis processes.

1μm 0.2μm each one, replace every three months. Precise filtration accuracy, specifically designed for technical cleanliness analysis. Folded structure delivers large dirt holding capacity and extended service life. Features low pressure difference and large flow flux without affecting cleanliness extraction. Made of pure material with low dissolution and excellent medium resistance. Complete accuracy grades available for graded filtration. High structural strength with excellent pressure resistance and erosion resistance.